A quick and easy tutorial on how to burp hydraulic disc brakes for mountain bikes. Most people think you always need to bleed a brake (completely flush out all … source Click here for the best online deals on bike accessories, electric bikes, kids bikes, mountain bikes, bicycle frames, and much more.
Iglobalbuy 26″ or 28″Bicycle 80cc 2 Stroke Motorized Gas Engine Motor Kit
Before you install the engine, to lubricate the inner components and make the cylinder bore have a longer lifespan, you should pour some lubricating oil into the cylinder bore from the spark plug hole, then drain off the lubricating oil and install the engine.
We have videos to show the installation and running of the engine.Contact us if you need.
Tips for start the motor
Unleaded petrol / oil mixture is necessary. Use only synthetic 2 stroke fuel to insure proper engine lubrication.
To start, move the choke lever to “on” position, hold in clutch, pedal the bike fast to get some speed, and then release the clutch gradually.
4. To stop, slow speed, disengage clutch and apply either original brake (if you didn’t remove the original left handle brake). 5. To stop the engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.2 stroke single cylinder natural air cooled;Brand New, item ship from US, estimate receiving time 2-6 business days.
Bore & Stroke: 47mm X 40mm=80 cm3,Oil capacity: 2 L; Max Speed: 25-38 mph;Oil Consumption: 2.5L/100km;Weight:10.92Kg
Fuel Type:Gasoline 93#;Mixing Ratio of Fuel and engine Oil: 10:1 for new sets, 14:1 or 16:1 after running 50KM;Please use premium quality oils to prolong engine life
Fits Most 26″ or 28′ Wheeled Bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments. Add some lubricant into the air cylinder before starting