Seeutek 80cc bicycle engine motor kit motorized bicycle engine for 26″ or 28″ Wheel



buy now

$129.99

[ad_1]

The kit includes all the parts and instructions necessary to convert your bike. It is a bit technical, and will require some time to install, thus professional installation is highly recommended. Please also keep in mind that the motor will use a mix of gasoline and oil. The oil is used as a lubricant. Without it, the performance and longevity of the motor will be reduced. Please refer to the manual for further information including gasoline/oil ratios.

The seller will not be held liable for improper installation or misuse of fuel. This product is not for amateur use. Therefore, by and use at your own risk.

Compatible with: Most 26″ Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm in diameter.

Tips for start the motor

1.Unleaded petrol / oil mixture is necessary.

2.Use only synthetic 2 stroke fuel to insure proper engine lubrication.

3.To start, move the choke lever to “on” position, hold in clutch, pedal the bike fast to get some speed, and then release the clutch gradually.

4. To stop, slow speed, disengage clutch and apply either original brake (if you didn’t remove the original left handle brake).

5. To stop the engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.

We have videos to show the installation and running of the engine.Contact us if you need.

If received any damaged parts, we will resend new parts to you as free!
2 stroke single cylinder natural air cooled; Max Speed: 25-38 mph;Oil Consumption: 2.5L/100km;Weight:10.92Kg
Fuel Type:Gasoline 93#;Mixing Ratio for Fuel and Oil:16:1 for break period (first 300 miles) / 25:1 after; Please use premium quality oils to prolong engine life
Fits Most 26″ Wheeled Bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments. Add some lubricant into the air cylinder before starting (Note: Seller is not responsible for misuse or this kit or any warranty after installation).

Click here for the best deals online for mountain bikes, hybrid bikes, electric bikes and all types of bicycle parts and accessories.

[ad_2]

Category: General
Tags: